We offer a wide variety of commercial doors. Our most popular commercial doors are made by Ceco and Eliason. Timely frames are normally used to frame our commercial doors. Each manufacturer has a section below:
Regent combines the aesthetic advantage of a beveled lock edge with the rigidity and impact resistance of Ceco honeycomb core construction. Regent's lock edge is beveled 1/8" in 2" to produce a tight closure clearance. Face sheets are supported by full honeycomb core to assure exceptionally flat surfaces with high structural resistance to impact damage. Regent accepts cylindrical, mortise and unit locks and is adaptable to other commercial hardware.
Where the versatility of a non-handed door is an important advantage, the Omega offers a honeycomb core construction which can be switched on the job site to right or left handed openings, swing in or out, or as double doors.
High frequency, high impact Imperial stands up to rugged traffic conditions. Imperial is furnished with foamed-in-place polyurethane core to assure exceptionally flat surfaces, complete chemical bonding of all interior surfaces, plus excellent insulating characteristics. Entrapped polyurethane foam provides a stable, durable insulation, superior to other foam products. Lock edge beveled 1/8" in 2" tight closure appearance.
Crisp, deep drawn embossed panel designs are available on 20 or 18 gage steel face sheets. Foamed-in-place polyurethane core provides high insulation. Decorative glass lites can complement the embossed patterns: Versadoor is available factory glazed with die-cast plastic trim and 1/8" safety glass (1/2" insulating glass optional). Non-handed and fully reversible on the job site, Versadoor can be used for right or left hand opening, swing in or out, single or in pairs.
Madera Doors - Stainable Steel Doors
HCP and HCG Doors have been engineered and fabricated for use in high impact traffic door areas. Doors will withstand everyday abuse from hand trucks, mobile dollies or palletized power equipment. For use in supermarkets, warehouses, furniture stores or any retail outlet. Many decor and window options.
HFG foam insulated, gasketed doors are supplied with a perimeter seal for use in coolers and other areas with temperature differentials. HCP partition doors are supplied with standard door clearances.
Use as a companion door to match our HCP models. For multiple purpose applications. Fabricated with a thermal formced exterior surface bonded to a solid core. Consult factory for specifics. Ideal for traffic doorways utilizing two-wheel hand trucks, carts or for personnel.
Walk-in Coolers - SCG & FCG Models
Solid or foam core gasketed doors with various metal and high pressure laminate combinations for walk-in coolers, refrigerated work rooms and processing areas. NOT recommended for FREEZER applications.
Model (SCG) 3/4 inch Solid Core Gasketed door should be used where temperature differentials are moderate, (10° to 30°). Model (FCG), (HFG) 1-1/2 inch thick Foam Core Gasketed model recommended for extreme temperature differentials (25° to 50°).
Solid Core Doors - SCP Models
Our most popular door line for use in many retail stores, restaurants, food service, supermarket, convenience, drug, department, bars, taverns, florist, service centers, hospitals - possibilities are unlimited. Selection of the right door for specific applications is important. Consult one of our sales people for recommendations.
Medium and heavyweight solid core doors with various metal, polymer resin panels or high pressure decorative plastic laminates and other accessory options will fill most interior double action doorway applications. We also fabricate specialized doors with exotic decors or various metal combinations. For heavy duty, high impact doors you should consider jamb guards, Easy Spring bumpers or bumper strips.
Flexible Self Closing Doors - FMP Model
Use in retail, industrial warehouse, institutional, department, walk-in coolers or other applications. For personnel, cart, two-wheelers, palletized or motorized traffic doorways requiring flexible type door panels. Ideal where sharp turns are necessary. Use in walk-in coolers as a secondary door when cooler door is held open for accessibility. Top mounted hardware. No bottom pivot.
Clear Flexible Doors - FCF Model
Use in commercial walk-in freezers and coolers as a secondary door to convserve refrigeration when the primary cooler door is being held open for stocking or loading purposes.
Tempered Aluminum Doors - LWP Models
Lightweight aluminum doors are ideal for sales are and stock rooms in most retail stores, food service doorways and some hospital areas. They open easily and close safely. Heavier doors should be considered if substantial negative air pressure exists. Decorative laminates to enhance your existing decor and stainless steel hardware available.
Aluminum doors can be modified with various accessory options. Jamg guards with impact plates are recommended for medium and heavy duty applications. Implact plates must be used if doors are ordered with jamb guards. Door opens with a light nudge and closes automatically after passage. Thousands of these economical versatile doors are used throughout the industry.
The Timely total opening system is designed to combine door frame, door, hardware and accessories, factory finished and ready to install as a modular unit. Doors are purchased from any major door manufacturer premachined to Timely specifications. Premaching includes preparing doors for hinges and hardware plus sizing to the required clearances and beveling. Frames are manufacturered in almost every standard wall size, giving this system tremendous flexibility from specification through installation stages.
Timely prefinished door frames are constructed of either 18, 20, or 22 gauge cold rolled steel to insure superior strength and impact resistance. Unlike traditional wood frames, Timely frames gain strength at the corners. Patented corner pieces hold casings in place for perfect miters every time. Frames feature a 14 gauge reinforcing plate for added hinge support.
Our difference is the anchorage. Timely frames are solidly anchored every 11 inches, directly into wood or metal studs. This method provides a level of structural integrity unmatched by convential wooden or free-standing hollow metal door frames. The installed Timely frame becomes an integral, maintenance-free part of the wall structure.
Several tests have been performed comparing the anchorage of Timely frames to traditional steel frames. These tests clearly show the Timely frame to exceed hollow metal frames in its ability to support heavy doors.
Frame strength and precision fit are essential elements in providing a secured entry system. By combining a Timely frame with a solid core door and deadbolt, the toughest entry level security requirements are met. Frames and doors are easily prepared for use with special locks and other security devices.
By utilizing Timely prefinished steel frames and premachined doors, the need for costly jobsite labor is virtually eliminated. It is no longer necessary for skilled tradesmen to fit the door and prepare for hardware. Finishing costs are greatly reduced because frames and doors are factory prefinished allowing a substantial cost savings. The frame can be installed after the walls are finished, thus eliminating time-consuming trimming and cut-in.
The versatility of the Timely prefinished steel door frame systems allows the system to be used in virtually all types of construction. The full spectrum of buildings from luxury hotels, high rise commercial structures, to hospitals, nursing homes, multi-family and single family residential developments are met with equal benefits in performance and economy. Our Basic Frame concept allows total design flexibility. By combining any of our painted or metal finish frames with your choice of casings, an unlimited variety of colors and visual effects can be achieved.
Our Basic Frame with aluminum snap-on casing (Timely II) offers the aesthetic beauty of aluminum with the integrity of steel. It retains the full range of fire ratings up to 90 minutes - priced dramatically lower than an all aluminum frame.
Timely also offers an adjustable prefinished door frame with a 3 3/4"- 9 1/8" range to meet any odd wall condition.
Ease of Installation
Timely prefinished frames are so easy to install that almost any tradesman, regardless of door hanging experience, can learn to install the Timely frame in a manner of minutes. The installation technique is equally adaptable to wood stud, metal stud, solid gypsum or demountable partition systems. The average installer can complete a frame and door installation in less than 15 minutes. Installation video available upon request.
The Timely frame is always installed with the door. The door acts as a template and the frame is adjusted to the door. Adjustment for precise and final fit is made with a screwdriver or awl through alignment slots in the frame. The casing then snaps on to conceal all fasteners. Aligning the frame to the door and securing the adjustable strike assures a precise and rattle free installation every time.
|Copyright © 2009 — Website Feedback||Home Page • Product Information • Our Company • Site Map • Contact Us|